Features of porous titanium


Porous titanium, also named as sintered titanium and titanium foams, is sintered from titanium powder. It has pore structure exhibit high specific strength, high energy absorption, excellent corrosion resistance and biocompatibility. Generally, porous titanium processed from irregular titanium or titanium alloy irregular powder. It can be isostatically pressed, molded, and extruded.

The main process for porous titanium (including tube and sheet) is made of high-purity titanium powder as raw material, after sieved, cold isostatic pressing, high temperature, high vacuum sintering. The porous titanium is made up of its high-tech materials and special molding process, which makes it have unique and excellent performance:

-Uniform structure, narrow pore size distribution and high separation efficiency.

-High porosity, low filtration resistance and high penetration efficiency.

-High temperature resistance, generally can be used below 280 degrees.

-Good chemical stability, acid and alkali corrosion resistance, with antioxidant properties.

-Good mechanical properties.

-Low pressure difference, small footprint, large flow.

-Strong anti-microbial ability, does not interact with microorganisms.

Porous titanium has a wide variety of unique and important applications, included filtration, gas absorbing, gas sparging, separation, catalyst supporting, current collection, medical implantation and etc.

https://www.edge-techind.com/category/Sintered-Titanium-113-1.html

https://www.edge-techind.com/Products/Non-ferrous-Metals/Titanium-Ti/Porous-Titanium/Porous-Titanium-Sheet-812-1.html

评论

发表评论

此博客中的热门博文

Alloying of molybdenum

图片
  The alloying principle of molybdenum is similar to that of tungsten. All the strengthening methods used to improve the heat resistance of tungsten are basically applicable to molybdenum. There are mainly the following types: solid solution strengthening, precipitation strengthening, dispersion strengthening and composite strengthening. Solution strengthening Solid solution strengthening includes the addition of trace elements and high content elements. The trace element solid solution strengthening method mainly refers to adding a trace amount of Ti, Zr, Fe, Mn, La, B and other alloy elements for solid solution strengthening to improve the performance of molybdenum. When trace elements are added, a certain amount of carbon is often added to the alloy. It is the alloy elements and carbon that form carbide dispersed particles to strengthen the strengthening effect. High content element solid solution strengthening The elements that improve the binding force between atoms...
阅读全文

Knowledge about TZM Alloy

  TZM material is an alloy of 0.50% Titanium, 0.08% Zirconium and 0.02% Carbon with the balance Molybdenum and is typically manufactured by powder metallurgy or arc-casting processes. It has a higher recrystallization temperature, higher creep strength & hardness, and higher tensile strength than pure molybdenum. In addition, TZM exhibits good thermal conductivity, low vapor pressure, good corrosion resistance and is machinable.   TZM Molybdenum Physical Properties: Density: 10.22g/cc, 0.37lb/in3 Melting Point: 2623°C, 4753°F Thermal Conductivity: 0.48 Cal/cm2/cm°C/sec Specific Heat: 0.073 Cal/gm/°C Coefficient of Linear Thermal Expansion: 2.50 micro-in/°F x 10-6 Electrical Resistivity: 6.85 micro-ohm-cm   The molybdenum TZM is a normally utilized constructional material for high-temperature applications. These microstructural aspects significantly affect quality at raised temperatures. By methods for carbide-reinforcing TZM features impro...
阅读全文

Tungsten tube-High density & melting point metal tube

图片
  Tungsten tubes are drilled from tungsten bars / rods, W tube with massive OD are going to be mold directly.   Tungsten – periodic symbol W - lays claim to the very best freezing point of all components. This characteristic combined with a superb ability to resist thermal shock enhances its ability to perform well as a conductor. Rocket cones, that should stand up to fast temperature changes and recurrent on and off cycles, area unit typically manufactured from tungsten. Tungsten's density conjointly permits it to expeditiously block radiation from sure areas whereas directional it to others. It will direct and form a beam of radiation, permitting doctors additional exactitude and management whereas treating cancerous tissue. With the employment of tungsten devices and shields, doctors area unit ready to target cancerous areas, whereas at the same time shielding healthy tissue from the harmful effects of radiation. Application The quartz production method uses c...
阅读全文